Supermicro Motherboard, MCP55Pro, Dual Opteron QC, EATX, Max 32GB DDR2, 2PCIEX16, PCIEX8, 2PCIEX4, PCI, 2GBE

CPU: Dual 1207-pin Socket F Supports up to two Quad-Core / Dual-Core AMD Opteron 2000 Series (Socket F) processor(s) NOTE: Motherboard PCB revision 2.01 is recommended for quad-core revision B1 or BA processors. System Bus: 1000MHz HyperTransport Chassis Optimized for H8DAi-2: Rackmount Tower / 4U: CSE-745TQ-700 CSE-745TQ-R700 CSE-745TQ-800 CSE-745TQ-R800 CSE-743T-645 CSE-743T-650 CSE-743TQ-650 CSE-743T-R760 CSE-743TQ-R760 Active Heatsink Recommend

Motherboard, cables, I/O shield, software, documentation

0GB Single or dual channel buffered registered ECC DDR2 667, 533, 400 MHz SDRAM up to 64GB. There are eight (8) 240 pin DIMM slots.

12" x 13.1"

Expansion slots: (2) x16 PCI-e Slots (nVidia SLI Technology Supported) (1) x8 PCI-e (using x16 slot) (2) x4 PCI-e (using x8 slots) (1) 32-bit PCI slot On board devices: Chipset: nVIDIA MCP55Pro, nVIDIA IO55 Clock Generator nVIDIA MCP55Pro SATA: - nVidia MCP55 Pro SATA2 3.0Gbps Controller - (6) SATA Ports - nVidia RAID 2.0 - SATA RAID 0, 1, 0+1, 5, JBOD Support IDE: - Single EIDE channel support up to two UDMA IDE devices - Supports UDMA Mode 5 - Supports PIO Mode 4 - Supports ATA 100/133 IPMI: - Support for Intelligent Platform Management Interface v.2.0 - 200-pin IPMI slot (SIMLP) - (Optional: AOC-SIMLP-B(+) R 3.00) - (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support - (KVM over LAN not support) - RMM (Remote Management Module) - (Card not included) - For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) Network Controllers: - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller - Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Super I/O Winbond 83627HG Audio: HD Audio ALC883 I/O: (1) Floppy port; 1.44 MB support (2) RJ45 LAN ports USB: - FUCI - Up to 8 USB Ports 2.0 Compliant, 1.1 Compliant - (4) Rear Ports - (4) Internal Headers Serial Ports: - (2) Fast UART 16550 serial ports - (2) Headers Parallel Port: 1 ECP / EPP parallel port Audio: 1 Line In / Line Out / Microphone port

To ensure system stability, a 550W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required] Power Configurations: ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery Internal/External modem remote ring-on Suspend to RAM (STR) Cooling: Total up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors

This product is subject to our return policy. Please see our complete return policy for details.

6 lbs

43201513