Cisco Nexus 3016 1U RM L3 Managed Switch 16xQSFP+ 2xPSU NXOS L3 Base & Enterprise Services

20.50 lb(s)

Layer 2 Layer 2 switch ports and VLAN trunks IEEE 802.1Q VLAN encapsulation Support for up to 4096 VLANs Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible) MSTP (IEEE 802.1s): 64 instances Spanning Tree PortFast Spanning Tree Root Guard Spanning Tree Bridge Assurance Cisco EtherChannel technology (up to 16 ports per EtherChannel) LACP: IEEE 802.3ad vPC Advanced PortChannel hashing based on Layer 2, 3, and 4 information Jumbo frames on all ports (up to 9216 bytes) Storm control (unicast, multicast, and broadcast) Private VLANs Layer 3 Layer 3 interfaces: Routed ports on interfaces, switch virtual interfaces (SVIs), PortChannels, and subinterfaces (total: 1024) 64-way Equal-Cost Multipath (ECMP) 2000 ingress and 1000 egress ACL entries Routing protocols: Static, RIPv2, EIGRP, OSPFv2, and BGP Bidirectional Flow Detection (BFD) for BGP HSRP and VRRP ACL: Routed ACL with Layer 3 and 4 options to match ingress and egress ACLs VRF: VRF-lite (IP VPN), VRF-aware unicast (BGP, OSPF, and RIP), and VRF-aware multicast uRPF with ACL; strict and loose modes Jumbo frame support (up to 9216 bytes) Multicast Multicast: PIM Version 2 Sparse Mode (PIM-SM) and SSM Bootstrap router (BSR), Automatic Rendezvous Point (Auto-RP) and Static RP Multicast Source Discovery Protocol (MSDP) and Anycast RP Internet Group Management Protocol (IGMP) Versions 2, and 3 Quality of service (QoS) Layer 2 IEEE 802.1p (class of service [CoS]) 8 unicast and 4 multicast hardware queues per port Per-port QoS configuration CoS trust Port-based CoS assignment Modular QoS CLI (MQC) compliance ACL-based QoS classification (Layers 2, 3, and 4) MQC CoS marking Differentiated services code point (DSCP) marking Weighted Random Early Detection (WRED) CoS-based egress queuing Egress strict-priority queuing Egress port-based scheduling: Weighted Round-Robin (WRR) Explicit Congestion Notification (ECN) Management Switch management using 10/100/1000-Mbps management or console ports CLI-based console to provide detailed out-of-band management In-band switch management Locator and beacon LEDs Port-based locator and beacon LEDs Configurable CoPP Configuration rollback SSHv2 Telnet AAA AAA with RBAC RADIUS TACACS+ Syslog Syslog generation on system resources (for example, FIB tables) Embedded packet analyzer SNMP v1, v2, and v3 Enhanced SNMP MIB support XML (NETCONF) support Remote monitoring (RMON) Advanced Encryption Standard (AES) for management traffic Unified username and passwords across CLI and SNMP Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) Digital certificates for management between switch and RADIUS server Cisco Discovery Protocol Versions 1 and 2 RBAC Cisco SPAN on physical, PortChannel, VLAN, and Fibre Channel interfaces ERSPAN Ingress and egress packet counters per interface PTP (IEEE 1588) boundary clock Network Time Protocol (NTP) Cisco OHMS Comprehensive bootup diagnostic tests Cisco Call Home Cisco DCNM Advanced buffer monitoring MIB support Generic MIBs: SNMPv2-SMI CISCO-SMI SNMPv2-TM SNMPv2-TC IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IANAiprouteprotocol-MIB HCNUM-TC CISCO-TC SNMPv2-MIB SNMP-COMMUNITY-MIB SNMP-FRAMEWORK-MIB SNMP-NOTIFICATION-MIB SNMP-TARGET-MIB SNMP-USER-BASED-SM-MIB SNMP-VIEW-BASED-ACM-MIB CISCO-SNMP-VACM-EXT-MIB Ethernet MIBs: CISCO-VLAN-MEMBERSHIP-MIB Configuration MIBs: ENTITY-MIB IF-MIB CISCO-ENTITY-EXT-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-ENTITY-SENSOR-MIB CISCO-SYSTEM-MIB CISCO-SYSTEM-EXT-MIB CISCO-IP-IF-MIB CISCO-IF-EXTENSION-MIB CISCO-NTP-MIB CISCO-IMAGE-MIB CISCO-IMAGE-UPGRADE-MIB Monitoring MIBs NOTIFICATION-LOG-MIB CISCO-SYSLOG-EXT-MIB CISCO-PROCESS-MIB RMON-MIB CISCO-RMON-CONFIG-MIB CISCO-HC-ALARM-MIB Security MIBs: CISCO-AAA-SERVER-MIB CISCO-AAA-SERVER-EXT-MIB CISCO-COMMON-ROLES-MIB CISCO-COMMON-MGMT-MIB CISCO-SECURE-SHELL-MIB Miscellaneous MIBs: CISCO-LICENSE-MGR-MIB CISCO-FEATURE-CONTROL-MIB CISCO-CDP-MIB CISCO-RF-MIB Layer 3 and Routing MIBs: UDP-MIB TCP-MIB OSPF-MIB BGP4-MIB C

Switch, AC power supply, Reversed Airflow Port Side Intake, software, documentation

Buffers: 9 MB shared
Boot flash memory: 2GB

Cisco NX-OS Layer 3 Base Services and Cisco NX-OS Layer 3 Enterprise Services is pre-installed.

1.7"h x 17.3"w x 19.7"d

I/O:
(16) Fixed 40 Gigabit Ethernet Enhanced Quad Small Form-Factor Pluggable (QSFP+) ports (each QSFP+ port can handle four 10 Gigabit Ethernet connections)
(2) RJ-45 10/100/1000-Mbps management ports
(1) RS-232 serial console port
(1) USB Type B port
(2) Power in

Dual redundant power supplies
Power Frequency: 50 to 60 Hz
Power supply types:
AC (forward and reversed airflow)
Typical operating power:
172 watts (W; with Twinax at 100% load; 2 power supply units [PSUs])
174W (with short-reach optics at 100% load; 2 PSUs)
Maximum power: 227W

27.8 lbs

Cisco NX-OS Software Release 5.0 and later

43222612