SPECIFICATIONS:
AP type: Indoor, dual radio, 5 GHz 802.11ac 4x4 MIMO
and 2.4 GHz 802.11n 2x2 MIMO
- Software-configurable dual radio supports 5 GHz (Radio 0)
and 2.4 GHz (Radio 1)
- 5 GHz: Four spatial stream Single User (SU) MIMO for up
to 1,733 Mbps wireless data rate to individual 4x4 VHT80
or 2x2 VHT160 client devices
- 2.4 GHz: Two spatial stream Single User (SU) MIMO for up
to 400 Mbps wireless data rate to individual 2x2 VHT40
client devices (300 Mbps for HT40 802.11n client devices)
- 5 GHz: Four spatial stream Multi User (MU) MIMO for up
to 1,733 Mbps wireless data rate to up to three MU-MIMO
capable client devices simultaneously
- Support for up to 255 associated client devices per radio,
and up to 16 BSSIDs per radio
- Supported frequency bands (country-specific
restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.850 GHz
• Available channels: Dependent on configured
regulatory domain.
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum.
Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal frequency-division
multiplexing (OFDM)
Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum (conducted) transmit power (limited by local
regulatory requirements):
- 2.4 GHz band: +18 dBm per chain
- 5 GHz band: +18 dBm per chain
- Note: conducted transmit power levels exclude antenna
gain. For total (EIRP) transmit power, add antenna gain
- Advanced Cellular Coexistence (ACC) minimizes
interference from cellular networks.
- Maximum ratio combining (MRC) for improved
receiver performance.
- Cyclic delay/shift diversity (CDD/CSD) for improved
downlink RF performance
- Short guard interval for 20-MHz, 40-MHz, 80-MHz and
160-MHz channels.
- Space-time block coding (STBC) for increased range and
improved reception.
- Low-density parity check (LDPC) for high-efficiency error
correction and increased throughput.
- Transmit beam-forming (TxBF) for increased signal
reliability and range.
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 600 (MCS0 to MCS31)
- 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for
VHT20/40/80, NSS = 1 to 2 for VHT160)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11ac very high throughput (VHT) support:
VHT 20/40/80/160
- 802.11n/ac packet aggregation: A-MPDU, A-MSDU
ENVIRONMENTAL PROPERTIES:
Operating Temperature: 32 to 122 F (0 to 50 C)
Storage Temperature: -40 to 158 F (-40 to 70 C)
Operating Humidity: 5 to 95%, non-condensing
MTBF: 916,373 hours at 77 F (25 C)