APC Galaxy VM 225KVA UPS 480-480V, 65kAIC, Start-Up Service 5x8, Parallel Capable (GVMPB225KG65S)

1548.80 lb(s)

Dry Contact inputs:
User assignable inputs allow other equipment alarms to be monitored through the power system controller

Dry contact output:
Provides remote notification of failures when used with APC environmental monitoring unit or system.

ECOnversion mode:
Operating mode that ensures ultra high efficiency while charging the batteries, conditioning the load power factor and ensuring a Class 1 output voltage regulation.

Integrated network management:
Provides complete remote monitoring and control of the UPS. Enables you to monitor remote UPS's from a web browser or industry standard Network Management System.

Lithium-ion battery:
Lithium-ion batteries provide twice the service life of a typical lead acid battery and are small, light and environmentally friendly. Batteries are sold separately.

Modbus RS-485 and Modbus TCP support:
Enables remote monitoring and interfaces with StruxureWare Data Center Expert, building management systems, or other third-party systems.

Parallel-capacity capable:
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

Pre-installed dust filters:
Protects the UPS from harsh environments

Seismic compliance:
These all-steel enclosures meet IBC Zone 2 seismic rating.

SmartSlot:
Customize UPS capabilities with management cards.

StruxureWare Data Center Expert compatible:
Enables centralized management via StruxureWare Data Center Expert.

Top and bottom cable entry (standard):
Flexibility that allows the customer to decide - and at no extra cost.

UPS, dust filter, top and bottom cable entry, start-up service (part number: WSTRTUP-VM-18), documentation

77.56"H x 39.45"W x 33.62"D

Output power capacity: 202.5 KWatts / 225.0 kVA
Max Configurable Power (Watts): 202.5 KWatts / 225.0 kVA
Nominal Output Voltage: 480V 3PH
Neutral Output Current: 244A
Output Voltage Distortion: Less than 2%
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Output Frequency (not synced): 50/60 Hz +/-1 Hz
Load Crest Factor: Unlimited
Topology: Double Conversion Online
Waveform type: Sine wave
Overload Operation: 10 minutes @ 125% and 60 seconds @ 150%
Output Voltage THD: Output Voltage Tolerance: +/- 1% static and +/- 3% at 100% load step
Bypass: Built-in Static Bypass

Nominal Input Voltage: 480V 3PH
Input frequency: 40 - 70 Hz
Input Connections: Hard Wire 3-wire (3PH + G)
Input voltage range for main operations: 360 - 576 (480)V
Input voltage adjustable range for mains operation: 360 - 576 (480)V
Input Total Harmonic Distortion: Less than 3% for full load
Type of Input Protection Required: 3-pole breaker
Maximum Short Circuit Withstand (Icw): 65.0kAmps
Maximum Input Current: 347.0A
Input Power Factor at Full Load: 1.0

Battery type: No internal battery - uses external battery system
Nominal Battery Voltage: 480V
End of Discharge Maximum Battery Current: 549.0A
Expected Battery Life (years): 7 - 10
End of Discharge Battery Voltage: 384
Efficiency in Battery Operation: 95.5 %
Maximum Available Short Circuit Current: 65kAmps
Overload Operation: 60 seconds @ 125% and 30 seconds @ 150%


Control panel: 7" Touch Screen Display
Audible Alarm: Audible and visible alarms prioritized by severity
Emergency Power Off (EPO: Optional
Available SmartSlot Interface Quantity: 2

Operating Temperature: 32 - 104 F ( 0 - 40 C )
Operating Relative Humidity: 0 - 95 %
Operating Elevation: 0-3333ft ( 0-999.9meters )
Storage Temperature: -15 - 40 C
Storage Relative Humidity: 0 - 95 %
Storage Elevation: 0-49212ft ( 0-14763.6meters )
Audible noise at 1 meter from surface of unit: 65.0dBA
Online thermal dissipation: 27670.0BTU/hr
Protection Class: IP 20

Bypass Protection Device: 400.0
Max Bypass Input Current: 350.0A

This product is subject to our return policy. Please see our complete return policy for details.

9.8 lbs

39121011