This is an APC Industrial Panel and DIN Rail 500VA UPS with Standard Battery.
Характеристики
28.30 lb(s)
Communications & Management
Interface Ports: DB-9 RS-232, SmartSlot Available
SmartSlot Interface Quantity: (1)
Control panel: LED status display with load and battery bar-graphs and On Line, On Battery, Replace Battery, Overload Indicators
Audible Alarm: Alarm when on battery, distinctive low battery alarm, overload continuous tone alarm
Emergency Power Off (EPO): Yes
Surge Protection and Filtering
Surge energy rating: 540 Joules
Filtering: Full time multi-pole noise filtering, 0.3% IEEE surge let-through, zero clamping response time, meets UL 1449
Conformance
Regulatory Approvals: UL Recognized
Environmental Compliance: RoHS 7b Exemption, REACH - Contains No SVHCs
Output
Output Power Capacity: 325W/500VA
Nominal Output Voltage: 120V
Efficiency at Full Load: 94.0%
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 57-63Hz for 60Hz nominal
Topology: Line Interactive
Waveform Type: Sine wave
Input
Nominal Input Voltage: 120V
Input Frequency: 50/60Hz +/- 3Hz (auto sensing)
Input voltage range for main operations: 82-144V
Input voltage adjustable range for mains operation: 75-154V
Batteries & Runtime
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte, leakproof
Included Battery Modules: (1)
Available Battery Slots: (1)
Typical recharge time: 2.5 hours
RBC Quantity: (1)
On battery runtime, full load: 8 minutes (325W)
On battery runtime, half load: 24.7 minutes (162W)
This product is subject to our return policy. Please see our complete return policy for details.