Cisco UCS C220 M3 1U RM (2x) Xeon E5-2650 2.0GHz 64GB DDR3 2x600GB SAS 8x2.5" Bays 2x10GbE 2x650W Rail Kit

35.60 lb(s)

Server, rail kit, documentation

64GB (8x8GB) PC3-12800 1600MHz ECC Registered (RDIMM) DDR3, expandable up to 256GB. There are sixteen DIMM slots. Eight contain removable 8GB modules; the others are available. Advanced error-correcting code (ECC) Mirroring option Память population guidelines: Registered (RDIMMs), Unbuffered (UDIMMs), or load-reduced DIMMs (LRDIMMs) are supported. Do not mix RDIMMs, LRDIMMs, or UDIMMs. Non-ECC DIMMs are not supported. Память is organized with four memory channels per CPU, with up to two DIMMs per channel. For optimum performance, do not mix DIMMs with different frequencies. If you mix DIMM frequencies, the system defaults to the lower frequency. DIMMs for CPU 1 and CPU 2 (when populated) must always be configured identically. The server supports 1 or 2 DIMMs per channel for single- or dual-rank RDIMMs. The server supports 1 or 2 DIMMs per channel for quad-rank LRDIMMs. When using mirroring, DIMMs must be installed in identical pairs across paired DDR3 buses. That is, mirrored pairs in channels A and B must be identical and pairs in channels C and D must be identical. However, the DIMMs used in channels A and B and in C and D can be different. Память mirroring reduces the amount of available memory by 50% (quantity of DIMMs must be even for mirroring). Video memory: Matrox G200e graphics.

There is no operating system installed. Supported operating systems include: Microsoft Windows Server SUSE Linux Enterprise Server Red Hat Enterprise Linux BMC VMware 5

1.7"h x 16.9"w x 28.5"d

Expansion slots (on a riser card): (1) PCIe x16 (x24 connector), full-height, half-length (1) PCIe x8 (x16 connector), half-height, half-length Expansion bays: (8) 2.5" SFF SAS or SATA hot-swapbays for hard disk drives (HDDs) or solid state drives (SSDs) NOTE: Two bays are occupied by 600GB 6Gbps SAS 10K RPM hard drives; the others are available. NOTE: The server also contains one internal USB 2.0 port on the motherboard for optional USB storage drives. I/O: Rear: (1) RJ-45 serial port connector (2) USB 2.0 (1) DB15 VGA (2) RJ-45 LAN (1) RJ-45 LAN Ethernet management port, using Cisco Integrated Management Controller (CIMC) firmware (2) Power in Front: (1) KVM console connector (supplies two USB, one VGA, and one serial connector)

Power: (2) 650W power supplies (redundant) NOTE: Power cables not included. A minumum of 2 power cables are required for this configuration. Cooling: (5) Hot-swappable fans for front-to-rear cooling

1 lbs

43211501