Cisco Channelized T1 E1 and ISDN PRI Module for 2010 Connected Grid Router - ISDN Terminal

0.84 lb(s)

Module, documentation

FEATURES:

- Cisco IOS Software configurable for T1 or E1 operation
- Integrated CSU/DSU per port
- Fractional T1/E1 (n x DS-0) or full T1/E1
- Balanced or unbalanced E1 termination in the same module
- E1 unframed and framed modes (G.703 or G.704)
- Support for Multilink Point-to-Point Protocol (PPP) and Multilink Frame Relay (FRF.16)
- PRI for data

SPECIFICATIONS:

LEDs:
- Carrier Detect/Loopback (CD/LP):
- Off = No carrier detect
- Green On = Carrier detect
- Yellow On = Port in loopback mode
- Alarm (AL):
- Off = No alarms
- Yellow On = Port in alarm mode
Line Bit Rate:
- E1: 2.048Mbps
- T1: 1.544Mbps
Line Coding:
- E1: High-density bipolar three (HDB3)
- T1: Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS)
Framing Formats:
- E1: CRC4
- T1: Super Frame (SF) and Extended Super Frame (ESF)
Output Levels:
- E1: short haul/long haul
- T1: (line build out [LBO]): 0, -7.5, or -15 dB

ENVIRONMENTAL PROPERTIES:

Operating Temperature -40 to 140 F (-40 to 60 C)
Storage Temperature: -40 to 185 F (-40 to 85 C)
Operating/Storage Humidity: 5 to 95%, non-condensing, relative
Operating Altitude: Up to 10,000 ft. (3048 m.)
Storage Altitude: Up to 16,000 ft. (4875 m.)

2.5"h x 3.0"w x 7.8"d

(1) T1/E1 RJ-48C

1.84 lbs

43222612